固相微萃取-毛细管气相色谱法测定水中有机污染物

固相微萃取是一种快速、简便、集萃取浓缩于一体的样品前处理技术,具有分析快速、灵敏度高、无需有机溶剂的优点。用固相微萃取-毛细管气相色谱分析水中甲醇、丙酮、异丙醇、乙醇、乙腈、丙烯腈,检出限可达0.003～0.03mg/L。     

北京市工业废水和城市污水中菊酯类农药残留分析

建立了基于18C固相萃取柱和气相色谱/电子捕获（GC/ECD）分析水体中环境激素类物质--菊酯类农药的分析方法,并对方法的回收率、灵敏度进行了评价,同时分析了北京市七类典型污染点源50个采样点位菊酯类农药的浓度,检出的菊酯类农药包括联苯菊酯、氰戊菊酯、氯氰菊酯和溴氰菊酯,其检出率都较低,低于22%.检出菊酯类农药的浓度范围是0.013～1.246μg/L.该方法对菊酯类农药的回收率达到67.7%～96.2%,检测限为0.010～0.015μg/L.溴氰菊酯在废水排放中的达标率为100%.     

壬基酚聚氧乙烯醚在污水处理过程中的迁移转化行为

用正相色谱－质谱联用法（NPLC－MS）分离分析高聚合度的NPnEO(n＞2）,用气相色谱－质谱联用方法（GC－MS）测定其中的NP,NP1EO和NP2EO浓度,对NPnEO在城市污水处理厂的迁移转化行为进行了研究。在污水处理厂的进水中,检测出NP和NPnEO(n=1-23）,总浓度为174nmol/L,其中NP2EO的浓度最高,为89．6nmol/L;其次分别为NP（42．2nmol/L）和NP1EO（12．2nmol/L）;出水中同样检测出NP和NPnEO(n=1-18),其中NP2EO的浓度最高,为37．2nmol/L;其次分别为NP（6．64nmol/L）和NP1EO（0．135nmol/L)。在城市污水处理过程中,NPnEO从高聚合度降妥成低聚合度,NP和NPnEO的总去降率为71％。另外,NP和NPnEO在污泥及污泥过滤水中的分配表明污泥对NPnEO有明显的吸附作用,并近似符合Dubinin-Astakhov等温吸附。     

某糠醛厂排放废水及周围地下水的GC/MS测定

某地地下水显淡黄色有异味，为查明被污染原因，我们利用ＧＤＸ－１０２树脂富集，对该处唯一的一家工厂——某糠醛厂排放的废水及其周围地下水同时进行了ＧＣ／ＭＳ测定．以上两种水体中均有呋喃类化合物（包括糠醛）及酚类化合物检出，而远离工厂的上游地下水未发现以上两类化合物，这一结果表明，该地下水区被工厂排放的废水所污染     

Photodegradation of acetochlor in water and UV photoproducts identified by mass spectrometry

The sunlight photodegradation half-lives of 20 mg/L acetochlor were 151, 154 and 169 days in de-ionized water, river water and paddy water, respectively. When exposed to ultraviolet (UV) light, acetochlor in aqueous solution was rapidly degraded. The half-lives were7.1, 10.1, and 11.5 min in de-ionized water, river water and paddy water, respectively. Photopreduets of acetochlor were identified by gas chromatography/mass spectrometry(GC/MS) and found at least twelve photoproducts resulted from dechlorination with subsequent hydrtrxylation and cyclization processes. The chemical structures of ten photoproducts were presumed on the basis of mass spectrum interpretation and literature data. Photoproducts are identified as 2-ethyl-6-methylaniline; N, N-diethylaniline ; 4, 8-dimethyl-2-oxo- 1,2,3,4- tetrahydroquino-line; 2-oxo-N-(2-ethyl-6-methylphenyl)-N-(ethoxymethyl) acetamide; N-(ethoxymethyl)-2‘-ethyl-6‘-methylformanilide; 1-hydroxyaeetyl-2-ethoxyl-7-ethylind ole; 8-ethyl-l-ethoxymethyl-2-oxo-1, 2, 3, 4-tetrahydroquinoline; 4, 8-dimethyl-l-ethoxymethyl-2-oxo-1, 2, 3, 4-tetrahydroquinoline; 2-hydroxy-2‘-ethyl-6‘-methyl-N-(ethoxymethyl) acetanilide and a compound related to acetochlor. The other two photoproducts were detected by GC/MS although their chemical structure was unknown.     

气相色谱法测定水中的苦味酸

将水样中的苦味酸氯化后，用ECD气相色谱法测定氯化苦的量，来确定苦味酸的浓度。采用保留时间定性，外标法定量。实验表明，该方法能快速有效地提取并测定水体中的苦味酸。在HP-5毛细管柱上，对苦味酸的氯化产物有较好的分离效果。方法快速、反应较为彻底，灵敏度高，精密度和准确度较好。     

洹河底泥中有机污染物调查与分析

介绍了GC/MS联用仪对河流底泥中微量有机污染物进行定性、定量分析的实验方法,探讨了底泥与地表水中有机物种类和含量间的关系。     

Headspace-SPME-GC-MS Identification of Volatile Organic Compounds Released from Expanded Polystyrene

A method for the identification of volatile organic compounds (VOCs) released from packaging expanded polystyrene (EPS) is presented. Headspace solid-phase microextraction (HS-SPME) with a 75-m carboxen-polydimethylsiloxan fiber was used as sample preparation technique before the determination of the volatile organic compounds by gas chromatography–mass spectrometry (GC-MS). For separation of compounds, two fused silica capillary columns of different polarity (DB-5ms and BPX-50) were used. Styrene monomer with his impurities and oxidation products, as well as residual pentane, were identified in the headspace of EPS.     

Reusability of sewage sludge in clay bricks

Bricks produced from sewage sludge in different compositions were investigated. Results of the tests indicated that the sludge proportion is a key factor in determining the brick quality. Increasing the sludge content results in a decrease in brick shrinkage, bulk density, and compressive strength. Brick weight loss on ignition was mainly due to the contribution of the contained organic matter from the sludge being burnt off during the firing process, as well as inorganic substances found in both clay and sludge. The physical, mechanical, and chemical properties of the bricks that were supplemented with various proportions of dried sludge from 10 to 40wt% and generally complied with the General Specification for Brick as per the Malaysian Standard MS 7.6:1972, which dictates the requirements for clay bricks used in walling in general. A standard leaching test method also showed that the leaching of metals from the bricks is very low.     

填充柱(FID)-顶空气相色谱法测定水和废水中丙烯腈

本文用顶空气相色谱法测定水和废水中丙烯腈,具有简便、快速、灵敏、准确,干扰少,适用性强等优点,适用于不同类型的环境水样分析。